Inverter Lower Roller Motor - Xerox Paser 7400 Service Manual

Inverter Lower Roller Motor

1.
Remove the Inverter and base unit from the Finisher (page 5-5).
2.
Remove the Inverter Rear Covers (page 5-19).
3. Disconnect the 4-wire cable from the inverter controller board connector labeled
Motor_A. Be sure to lift the cable harness out of the cable guides.
4. Remove the Inverter Controller Board (page 5-55).
5.
Remove the Power Supply Board (page 5-56).
6.
Remove the two screws (metal flange, 6 mm) and the anti-vibration spring from
the motor.
7. Pull the motor and its associated gear free from the gear assembly.
5-68 Phaser 7400 Color Printer Options Service Manual
Lower Roller Motor
s7400-494