Xerox Paser 7400 Service Manual page 217

6.
Disconnect the cable connector (to CN10) behind the Punch Unit.
7.
Slide the Finisher away from the Inverter and then free the harness.
8. Free the harness from the Edge Saddle and disconnect the two connectors (to
CN18).
9.
Remove the two screws (metal flange, 6 mm), free the tab of the harness guide,
and remove all connectors to clear the harness guide.
Service Parts Disassembly
Edge Saddle
Harness Guide
Hook
Connector
s7400-227
s7400-228
5-31