Processing Tray Assembly - Xerox Paser 7400 Service Manual

Processing Tray Assembly

1.
Remove the Processing Tray Upper Cover (page 5-15).
2.
Remove the Upper Right Cover Assembly (page 5-37).
3. Remove the Side Guide (page 5-107).
4. Remove the two screws (metal, 10 mm) and disconnect the following four
connectors:
CN36 to Clutch
CN85 to Rear Alignment Motor
CN63 to Front Alignment Motor
CN57 to Delivery Motor
Delivery Motor
CN36
5-38
Rear Alignment Motor
CN57
CN65
Phaser 7400 Color Printer Options Service Manual
Front Alignment Motor
CN63
s7400-218