Lift Motor
1.
Remove the Paper Exit Tray (page 5-7).
2.
Remove the Rear Cover (page 5-11).
3.
Remove the Upper Cover (page 5-13).
4.
Remove the Side Guide (page 5-107).
5.
Remove three screws (metal, 6 mm) from the Lift Motor cover box.
6.
Disconnect connector CN 70 from the cover box and motor, then lift the cover
box (which includes motor and gear assembly) free from the chassis.
7.
Slide the belt off of the motor.
Lift Motor Clock Sensor
8.
To remove the motor, remove the two small screws (metal, 4 mm) holding the
motor to the cover box.
Service Parts Disassembly
Lift Motor
Lift Motor Cover Box
s7400-667
5-59