Binding Clutch - Xerox Paser 7400 Service Manual

Binding Clutch

1.
Remove the Paper Exit Tray (page 5-7).
2.
Remove the Rear Cover (page 5-11).
3. Remove the Staple/Fold Drive Unit (page 5-30).
4. With Staple/Fold unit out of the way, you can now disconnect connector CN72
from the clutch.
5.
Remove the k-clips from the gear assembly of the clutch.
6.
Slide the belt off of the clutch gear.
7.
Remove three screws (metal, 6 mm) holding the clutch to the chassis.
5-66 Phaser 7400 Color Printer Options Service Manual
Binding Clutch
s7400-694