Xerox Paser 7400 Service Manual page 185

2.
With the paper fold rollers and saddle cam positioned as shown in the proceeding
figure, mount gears as shown in the following figure. Align the mark (either one
of the two marks) on the saddle cam drive gear with the mark on the relay gear.
The relay gear is located on the half of the periphery where gears with a smaller
face width are arranged).
3.
With the mark on the saddle cam drive gear aligned with the mark on the relay
gear, align the other mark on the relay gear with the rib of the paper folding roller
drive gear.
Adjustments and Calibrations
Saddle Cam
Drive Gear
Relay Gear
Paper Folding
Roller Drive Gear
s7400-214
4-19