Photo Sensor Board - Xerox Paser 7400 Service Manual

Photo Sensor Board

1.
Remove the Rear Cover (page 5-11).
2.
Remove the Front Door (page 5-8).
3. Remove the Upper Cover (page 5-13).
4. Remove the Punch Motor Assembly (page 5-46).
5. Remove the screw (metal flange, 6 mm).
6.
Remove the harness from the harness guide on the board, and then detach the
cover.
Board Cover
Service Parts Disassembly
Board Cover
Harness
Harness Guide
s7400-263
5-51