Setting Drying Time - Ricoh L4160 Operation Manual

Setting Drying Time

In the drying time setting, the following items for ink drying time are set.
• SCAN : Ink drying time for each scanning is set. (During bidirectional printing, the machine stops for a
certain period of time specified for each of the outward and return scanning.)
• When you give priority to the setting at the RICOH Software RIP side, make the setting value "Host".
• "SCAN" set in this machine is displayed as "Pause Time per Scan" in the RICOH Software RIP.
1
Press the
2
Press the
3
Press
4
Press the
5
Press
• To enable the drying time specified in your RIP, select "Host".
• Scanning setting value : Host or 0.0 sec. to 9.9 sec.
6
Press the
7
Press the
3-4
key in LOCAL.
key.
to select [DRYING TIME].
key.
to set drying time for scanning.
key.
key several times to end the setting.
F UNC T I ON
S E TUP [ EN T ]
S E TUP
F E ED COMP . [ EN T ]
S E TUP
DRY I NG T I ME [ EN T ]
SCAN
= HOS T
SCAN
= HOS T
S E TUP
DRY I NG T I ME [ EN T ]