Ricoh L4160 Operation Manual page 110

5
Clean the area around the wiper.
• Dip the clean stick in the cleaning liquid for maintenance, and wipe the space below the wiper guide,
and the space between the wiper slider and ink guard W.
Wiper guide
Space below the wiper guide
Enlarged view of the Wiper Slider
and Ink Guard W
6
Press the
• The carriage moves onto the Media Transfer Surface.
7
Clean the cap rubber and cap rubber cover.
• Wipe off the ink sticking to the cap rubber and cap rubber
cover with a clean stick dipped in Cleaning Fluid for
maintenance. (Wipe off so that you can see blue color of
the cap rubber.) Wipe off so that Cleaning Fluid for
maintenance will not remain.
• At this
automatically.
Before cleaning
4-18
Do not clean this part
Clean this part along the rail
key.
• Until wiper cleaning is competed, [COMPLETED (NEXT): ENT] is displayed on the screen. After
the work up to the step 6 is completed, press the
before cleaning is completed, the machine moves to the next washing procedure.
time, the discharge passage
Wiper guide
is cleaned
After cleaning
Ink guard W
Space between the wiper
slider and ink guard W
CA P C L E AN I NG
COMP L E T ED ( NEX T ) [ EN T ]
key. If you press the
Cap rubber
Cap rubber cover
key