Head Cleaning
About head cleaning
Check the printed test pattern result and perform cleaning depending on the status.
Select one from the three types below:
SOFT
: When lines are bent, when any line is missing
NORMAL : When any line is missing, when colors are mixed
HARD
: When poor image quality cannot be improved even by NORMAL or SOFT cleaning
Perform head cleaning depending on the test printing result
There are three types of head cleaning. Use one by checking the test pattern.
1
In Local, Press the
2
Press
SOFT
NORMAL : When any line is missing,
HARD
3
Press the
4
Press
cleaning.
• Set Value
5
Press the
• On completion of cleaning, the screen returns to step1.
6
Perform test printing again, and check the result.
• Repeat the cleaning and the test printing until the drawing result becomes in normal.
When the image quality is not improved after the head cleaning.
• Clean the wiper and ink cap. (
• Wash the head nozzle. (
• Solve the failure of the image quality, referring to When Nozzle Clogging Cannot Be Solved.
(
P.4-22)
2-22
key two times.
to select the cleaning type.
:
When lines are bent, when any line is missing
When poor image quality cannot be improved even by NORMAL or SOFT cleaning
:
key.
to select a head to
: 12 (Cleaning both heads.)
1_ (Cleaning Head 1 only.)
_2 (Cleaning Head 2 only.)
key.
P.4-5)
P.4-17)
when colors are mixed
12
C L EAN I NG
SOF T
[ EN T ]
C L EAN I NG
HARD
[ EN T ]
S E L EC T HEAD
: 1 2
S E L EC T HEAD
: 1 _
1_
_2
* * C L EAN I NG * *
P L E A SE : WA I T