Setting The Cleaning Intervals - Ricoh L4160 Operation Manual

Setting the Cleaning Intervals

The cleaning type and the interval between each cleaning operation are set.
1
Select [AUTO MAINT.] of the maintenance menu.
(1) Press the
(2) Press
(3) Press
(4) Press the
2
Press
3
Press the
4
Press
cleaning operation.
• Set value : Lv.1, Lv.2, Lv.3
• As the LEVEL increases, the interval between each operation gets shorter.
5
Press the
• The cleaning type selection screen appears.
6
Press
• Set value : NORMAL, SOFT, HARD
7
Press the
8
Press the
4-26
key in LOCAL.
to select [MAINTENANCE] and press the
to select [AUTO MAINT.].
key.
to select [CLEANING].
key.
to set the interval between each
key.
to select a cleaning type.
• when white ink is filled, the default setting is
"HARD". (For four colors and six colors, it is
"SOFT".)
It is recommended for you to use in "HARD"
to prevent nozzle clogging.
key.
key several times to end the setting.
key.
AU TO MA I N T .
C L EAN I NG [ EN T ]
C L EAN I NG
: L v . 1
C L EAN I NG
: L v . 1
T Y PE
: NORMA L
T Y PE
: SOF T
AU TO MA I N T .
C L EAN I NG [ EN T ]