Stopping A Printing Operation Halfway; Deleting Received Data (Data Clear); Behavior After Printing Has Been Completed - Ricoh L4160 Operation Manual

Stopping a printing operation halfway

Perform the following operation when stopping a printing operation halfway.
1
Press the
• The printing operation stops.
• Interrupt data sending at the PC side during the data is sent from the
PC.
• Printing restarts from the interrupted data by repressing the

Deleting Received Data (Data Clear)

When you want to stop printing, delete the already received data.
1
Press the
2
Press the
• The ACTIVE lamp goes out.
• The received data is erased then it returns to the local mode.

Behavior after printing has been completed

Drying Feed
When printing has been completed, the feeding operation is performed to dry the printed surface with the
drying heater.
• Perform the feeding operation until the back edge of printing passes the drying heater.
• When you press the
• When the machine has been received next data continuously, it will operate after the last data is received.
Screen display during drying feeding
key during printing.
key in LOCAL.
key.
key, the operation is terminated.
D r y i n g
∗ ∗ : ∗ ∗ : ∗ ∗
Printing Data
< L OCA L >
w i d t h : 1 2 7 2 mm
key.
DA T A C L E AR
[ EN T ]
* * DA T A C L E AR * *
2-29
1
2
4
5
6