Ricoh L4160 Operation Manual page 59

Test Printing
Print a test pattern to check that there are no discharging defects such as nozzle clogging (slight touching of ink
or nozzle missing).
In addition, you can select the orientation of the test pattern to print from two types in order to perform test
printing repeatedly. Select one depending on your use.
Check before test
printing.
1
Press the
• Press
2
Press the
• Test printing starts.
• When the printing has been completed, the screen returns to step1.
3
Check the printed test pattern.
• When the result is normal, end the operation.
• When the result is abnormal, perform head cleaning.（
Normal pattern
Media-feeding direction
• If a media has been set
• If the head height has been adjusted
key in LOCAL.
to change the test pattern orientation.
key.
Nozzles are dirty
: When the set value is "FEED DIR."
: When the set value is "SCAN DIR."
P.2-5 • If the origin position has been set
P.2-5
T E S T PR I N T
( SCAN D I R . )
T E S T PR I N T
( SCAN D I R . )
P.2-22）
Nozzles are clogged
Abnormal pattern
Test Printing
[ EN T ]
* * PR I N T I NG * *
P L E A SE WA I T
[ EN T ]
2-21
1
2
4
5
6