Setting Nozzle Face Cleaning Time - Ricoh L4160 Operation Manual

Setting nozzle face cleaning time

When the set time has passed, nozzle face of the head is cleaned automatically to remove ink droplets on the
nozzle face.
In case that deflection, nozzle missing, or symptom which ink droplets fall down occurred, increase the level for
each type. If you increase the level, the intervals become shorter.
1
Press the
2
Press the
3
Press
4
Press the
5
Press
• Set Value : TYPE1, TYPE2
• TYPE1 is simple wiping performed for a short period.
• TYPE2 is normal wiping performed for a long period.
6
Press the
7
Press
key.
• Set Value : Lv1 to Lv6, MANUAL
• When Lv1 to Lv6, the operation interval is changed automatically depending on the device temperature.
The cleaning interval is the longest when Lv1 is selected, and becomes shorter as you select higher
levels.
• When [MANUAL] is set, set the intervals ins step8.
8
Press
key.
• Set Value :TYPE1: 90 to 600 sec
• Example of behavior: When it is set to 90Sec, wiping is performed one head by one per 45Sec.
9
Press the
3-8
key in LOCAL.
key.
to select [INTERVAL WIPING].
key.
to select types.
key.
to set levels, and press the
to set intervals, and press the
TYPE2: 10 to 90min
key several times to end the setting.
F UNC T I ON
S E TUP [ EN T ]
S E TUP
F E ED COMP . [ EN T ]
S E TUP
I N T ERVA L WI P I NG [ EN T ]
I N T ERVA L WI P I NG
: T YP E 1
I N T ERVA L WI P I NG
: T YP E 2
T Y PE 2
: L v 4
T Y PE 2
: L v 5
T Y PE 2
: 1 0 m i n