Setting The Display Of Media Residual - Ricoh L4160 Operation Manual

Setting the Display of Media Residual

Whether the screen displays the remaining amount of a media is set.
When the media remaining amount
display is turned to "ON"
When the media remaining amount
display is turned to "OFF"
• The amount of a media that has been fed by the printing and jog keys is reflected in the remaining
amount of a media.
• The length of a media (initial value of the remaining amount) is entered when a roll media is
detected.(
• The setting configured here does not become effective unless media detection is performed after the
setting has been complete.
1
Press the
2
Press
3
Press the
4
Press
5
Press the
6
Press
7
Press the
8
Press the
3-12
the remaining amount of a media is displayed in Remote.
(However, when a leaf media is used, the length of the media to be
printed is displayed.)
the remaining amount of a media is not displayed in the Remote.
P.2-12)
key in LOCAL.
to select [MACHINE SETUP].
key.
to select [MEDIA REMAIN].
key.
to select ON/OFF.
key.
key several times to end the setting.
F UNC T I ON
S E TUP [ EN T ]
F UNC T I ON
MACH I NE SE T UP [ EN T ]
MACH I NE SE T UP
AU TO P o w e r - o f f [ EN T ]
MACH I NE SE T UP
MED I A REMA I N [ EN T ]
MED I A REMA I N
: OF F
MED I A REMA I N
: ON
MACH I NE SE T UP
MED I A REMA I N [ EN T ]