Connector Of Temperature Sensor/ Drying Heater/Take-Up Device; Connector Of Temperature Sensor/Drying Heater/ Take-Up Device; Capping Station - Ricoh L4160 Operation Manual

Connector of Temperature sensor/ Drying heater/ Take-up device
Connector of Temperature sensor/ Drying heater/ Take-up device
If an error related to the Temperature sensor/ Drying heater/ Take-up device occurs, refer to the Chapter 5 and
check the connector.
Temperature sensor (red)

Capping station

• Be sure to wear the attached goggles in cleaning within the capping station to protect your
eyes against ink. Otherwise, you may get ink in your eyes.
The capping station consists of the ink caps, the wiper for cleaning
the heads, etc.
The ink caps prevent the nozzles in the heads from drying up.
The wiper cleans the nozzles in the heads.
The wiper is consumable.If the wiper is deformed or the media is
stained, replace the wiper with a new one. (
1-8
Drying heater (blue) Take-up device (black)
P.4-28)