Setting Auto Cleaning - Ricoh L4160 Operation Manual

Setting Auto Cleaning

You can set items so that the head cleaning is automatically performed when printing has been completed for
the set interval.
When printing has been completed, the machine count the print count printed after the previous head cleaning
and performs the cleaning automatically if necessary.
The machine can perform a stable printing operation with its heads always kept clean.
The first cleaning is performed immediately before the first printing after the machine is started. Then
subsequent cleaning is performed every printing on the specified count of print.
1
Press the
2
Press the
3
Press
4
Press the
5
Press
• Set value : OFF / 1 to 1000page
• When selecting OFF, proceed to Step 8.
6
Press the
7
Press
• Set value : NORMAL / SOFT / HARD
8
Press the
9
Press the
key in LOCAL.
key.
to select [AUTO CLEANING].
key.
to set a cleaning interval.
key.
to set a cleaning type.
key.
key several times to end the setting.
F UNC T I ON
S E T UP [ EN T ]
S E T UP
F E ED COMP . [ EN T ]
S E T UP
AU TO C L E AN I NG [ EN T ]
I N T ERVA L
= OF F
I N T ERVA L
= 1 p a g e
T Y PE
: SOF T
T Y PE
: NORMA L
1
1
3
5
6
3-7