Note For Media Setting - Ricoh L4160 Operation Manual

Note for media setting

When setting media, read the following notes carefully.
• Take care not to drop the media on a foot or so when the media is set. It may cause an
injury due to the media.
• There is a cutter inside the machine for cutting the print media. Do not touch any
parts other than the ones described in this manual when loading and replacing paper,
removing jammed paper, and cleaning the media transfer surface.
• Be careful not to get your fingers caught inside the machine and injured when replac-
ing paper.
• Be careful not to get your fingers caught inside the machine when opening and clos-
ing the cover of the paper feed section.
• Hold the roll paper horizontally with both of your hands. When the roll paper is set in
the paper holder, the paper may fall off from the folder and cause injury if you hold
the holder vertically.
• The roll stopper arm works with the clamp lever. Do not push the clamp lever down
while roll stopper is caught between the roll stopper arm and this machine. The roll
stopper arm might be broken and roll stopper function
*1. The function that once pulled out a certain amount of media, media pullout is temporarily locked.
OK
Device
side
Roll
holder
NoGood
Device
side
Roll
holder
Setting a Media
*1
might be disabled.
Roll stopper arm
Roll stopper
Roll stopper arm
Roll stopper
1
2
4
5
6
2-7