Ricoh L4160 Operation Manual page 113

5
Open the left maintenance cover.
(1) Turn four screws that fix the maintenance cover to
the left, and remove them.
(2) Remove the maintenance cover.
• If the maintenance cover is hard to remove, use the
supplied screwdriver.
6
Immerse Wiper for CR in Maintenance kit.
• Immerse much enough so that washing
• Do not wipe the nozzle surface with dry
7
Wipe the nozzle surface from the rear of the main
body to the front twice or three times with Wiper
for CR immersed in Maintenance kit.
• Do not rub too strong.
• If Wiper for CR has fluffed, replace it.
• If ink solid adheres to Wiper for CR,
8
Press the
9
Close the left maintenance cover then press the
key.
• After its initial operation, the machine returns to step1.
10
Perform head cleaning. (
11
Perform test printing. (
liquid may drip from it.
Wiper for CR.
change the surface to use for cleaning or
replace it.
key after the cleaning.
P.2-22)
P.2-20)
When Nozzle Clogging Cannot Be Solved
Rotate it left.
Maintenance
cover
Nozzle surface
C l o s e c o v e r
COMP L E T ED
Screw
Screw
Wiper for CR
[ EN T ]
4-21
1
1
1
4