Setting The Date And Time - Ricoh SG 2100N User Manual

4. Machine Setup Menus

Setting the Date and Time

Use the following procedure to specify the date, time, and time zone.
Date setting
1. Press the [ /Menu] key.
2. Press the [ ] or [ /Menu] key to display [Maintenance], and then press the [#Enter] key.
Menu:
Maintenance
3. Press the [ ] or [ /Menu] key to display [Date/Time], and then press the [#Enter] key.
Maintenance:
Date/Time
4. Press the [ ] or [ /Menu] key to display [Date Setting], and then press the [#Enter] key.
Date/Time:
Date Setting
5. Press the [ ] or [ /Menu] key to set the date, and then press the [#Enter] key.
(mainly Europe and Asia)
Date Setting:
30/ 8/2012
(mainly North America)
Date Setting:
8/30/2012
To specify the time right after this step, go to Step 4 in "Time Setting".
See page 142 "Time setting".
6. Press the [Escape] key.
Time setting
1. Press the [ /Menu] key.
2. Press the [ ] or [ /Menu] key to display [Maintenance], and then press the [#Enter] key.
Menu:
Maintenance
142