Stopping Printing - Ricoh Ri 2000 User Manual

9. Troubleshooting Guide

Stopping printing

If an SC error occurs during printing, stop printing.
If you cannot use the touch panel and if the platen has stopped inside the machine, turn off the machine
and pull the platen slowly to the front side of the machine by hand. Then, proceed to page 177, "Checking
the carriage position".
CAUTION: Moving the platen fast or hard by hand could cause a malfunction.
Press [STOP].
Press [CANCEL].
The printing job is stopped and the platen returns to the front side of the machine.
Proceed to page 177, "Checking the carriage position".
175
RICOH Ri 2000 User Manual