Wireless Security; No Security - ZyXEL Communications LTE5366 Series User Manual

Table 21 Configuration > Network > Wireless LAN > General (continued)
LABEL
Security Mode
Apply
Cancel
See the rest of this chapter for information on the other labels in this screen.

7.3 Wireless Security

The screen varies depending on what you select in the Security Mode field.

7.3.1 No Security

Select Open to allow wireless clients to communicate with the access points without any data
encryption.
Note: If you do not enable any wireless security on your LTE5366, your network is accessible to
any wireless networking device that is within range.
Chapter 7 Wireless LAN
DESCRIPTION
Select WPA2-PSK, WPA/WPA2 to add security on this wireless network. The wireless clients
which want to associate to this network must have same wireless security settings as this
device. After you select to use a security, additional options appears in this screen. See
Section 7.3 on page 72 for detailed information on different security modes. Or you can select
Open to allow any client to associate this network without authentication.
Note: If the WPS function is enabled (default), only Open and WPA2-PSK are
available in this field.
Click Apply to save your changes back to the LTE5366.
Click Cancel to reload the previous configuration for this screen.
LTE5366 Series User's Guide
72