ZyAIR G-2000 Plus User's Guide
Figure 138 Menu 11.1 Remote Node Profile for PPTP Encapsulation
Rem Node Name= ChangeMe
Active= Yes
Encapsulation= PPTP
Service Type= Standard
Service Name= N/A
Outgoing:
My Login=
My Password= ********
Retype to Confirm= ********
Authen= CHAP/PAP
PPTP My IP: Static
My IP Addr=
My IP Mask=
Server IP Addr=
Connection ID/Name=
Press Space Bar to Toggle.
The next table shows how to configure fields in menu 11.1 not previously discussed.
Table 97 Menu 11.1 Remote Node Profile for PPTP Encapsulation
FIELD
Encapsulation
My IP Addr
My IP Mask
Server IP Addr
Connection ID/
Name
25.3 Edit IP
Move the cursor to the Edit IP field in menu 11.1, then press [SPACE BAR] to select Yes.
Press [ENTER] to open Menu 11.3 - Remote Node Network Layer Options.
285
Menu 11.1 - Remote Node Profile
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Press [SPACE BAR] and then [ENTER] to select PPTP. You must also go to menu
11.3 to check the IP Address setting once you have selected the encapsulation
method.
Enter the IP address of the WAN Ethernet port.
Enter the subnet mask of the WAN Ethernet port.
Enter the IP address of the ANT modem.
Enter the connection ID or connection name in the ANT. It must follow the "c:id" and
"n:name" format.
This field is optional and depends on the requirements of your DSL modem.
Route= IP
ISP= No
Apply Alias= None
Edit IP= No
Telco Option:
Allocated Budget(min)= 0
Period(hr)= 0
Schedules=
Nailed-Up Connection= No
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100
Chapter 25 Remote Node Configuration