Cellular Status Screen - ZyXEL Communications 310 User Manual

Table 29 Monitor > System Status > Login Users (continued)
LABEL
User Info
Force Logout
Refresh

6.9 Cellular Status Screen

This screen displays your 3G connection status. Click Monitor > System Status > Cellular
Status to display this screen.
Figure 66 Monitor > System Status > Cellular Status
The following table describes the labels in this screen.
Table 30 Monitor > System Status > Cellular Status
LABEL
Refresh
More Information
#
Extension Slot
Connected Device
ZyWALL 110/310/1100 Series User's Guide
DESCRIPTION
This field displays the types of user accounts the ZyWALL uses. If the user type is
ext-user (external user), this field will show its external-group information when you
move your mouse over it.
If the external user matches two external-group objects, both external-group object
names will be shown.
Select a user ID and click this icon to end a user's session.
Click this button to update the information in the screen.
DESCRIPTION
Click this button to update the information in the screen.
Click this to display more information on your 3G, such as the signal strength,
IMEA/ESN and IMSI. This is only available when the 3G device attached and
activated on your ZyWALL. Refer to
This field is a sequential value, and it is not associated with any interface.
This field displays where the entry's cellular card is located.
This field displays the model name of the cellular card.
Section 6.9.1 on page 95.
Chapter 6 Monitor
93