ZyXEL Communications 310 User Manual page 102

Chapter 6 Monitor
Table 36 Monitor > Log (continued)
LABEL
Email Log Now
Clear Log
#
Time
Priority
Category
Message
Source
Destination
Note
The Web Configurator saves the filter settings if you leave the View Log screen and return to it
later.
102
DESCRIPTION
Click this button to send log message(s) to the Active e-mail address(es) specified
in the Send Log To field on the Log Settings page (see
489).
Click this button to clear the whole log, regardless of what is currently displayed on
the screen.
This field is a sequential value, and it is not associated with a specific log message.
This field displays the time the log message was recorded.
This field displays the priority of the log message. It has the same range of values
as the Priority field above.
This field displays the log that generated the log message. It is the same value used
in the Display and (other) Category fields.
This field displays the reason the log message was generated. The text "[count=x]",
where x is a number, appears at the end of the Message field if log consolidation is
turned on (see Log Consolidation in
were aggregated to generate into this one.
This field displays the source IP address and the port number in the event that
generated the log message.
This field displays the destination IP address and the port number of the event that
generated the log message.
This field displays any additional information about the log message.
Section 38.3.2 on page
Table 196 on page 490). and multiple entries
ZyWALL 110/310/1100 Series User's Guide