ZyXEL Communications 310 User Manual page 205

Vpn firewall
Hide thumbs Also See for 310:
Table of Contents

Advertisement

Figure 118 Configuration > Network > Routing > OSPF
The following table describes the labels in this screen. See
information as well.
Table 75 Configuration > Network > Routing Protocol > OSPF
LABEL
OSPF Router ID
Redistribute
Active RIP
Type
Metric
Active Static Route Select this to advertise routes that were learned from static routes. The ZyWALL
Type
Metric
Area
ZyWALL 110/310/1100 Series User's Guide
DESCRIPTION
Select the 32-bit ID the ZyWALL uses in the OSPF AS.
Default - the first available interface IP address is the ZyWALL's ID.
User Defined - enter the ID (in IP address format) in the field that appears when
you select User Define.
Select this to advertise routes that were learned from RIP. The ZyWALL advertises
routes learned from RIP to Normal and NSSA areas but not to Stub areas.
Select how OSPF calculates the cost associated with routing information from RIP.
Choices are: Type 1 and Type 2.
Type 1 - cost = OSPF AS cost + external cost (Metric)
Type 2 - cost = external cost (Metric); the OSPF AS cost is ignored.
Type the external cost for routes provided by RIP. The metric represents the "cost" of
transmission for routing purposes. The way this is used depends on the Type field.
This value is usually the average cost in the OSPF AS, and it can be between 1 and
16777214.
advertises routes learned from static routes to all types of areas.
Select how OSPF calculates the cost associated with routing information from static
routes. Choices are: Type 1 and Type 2.
Type 1 - cost = OSPF AS cost + external cost (Metric)
Type 2 - cost = external cost (Metric); the OSPF AS cost is ignored.
Type the external cost for routes provided by static routes. The metric represents the
"cost" of transmission for routing purposes. The way this is used depends on the
Type field. This value is usually the average cost in the OSPF AS, and it can be
between 1 and 16777214.
This section displays information about OSPF areas in the ZyWALL.
Chapter 10 Routing Protocols
Section 10.3.2 on page 206
for more
205

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zywall 1100 seriesZywall 110 seriesZywall 310 series

Table of Contents