ZyXEL Communications 310 User Manual page 484

Chapter 37 System
Figure 335 Configuration > System > IPv6
The following table describes the labels in this screen.
Table 193 Configuration > System > IPv6
LABEL
Enable IPv6
Apply
Reset
484
DESCRIPTION
Select this to have the ZyWALL support IPv6 and make IPv6 settings be available on
the screens that the functions support, such as the Configuration > Network >
Interface > Ethernet, VLAN, and Bridge screens. The ZyWALL discards all IPv6
packets if you clear this check box.
Click Apply to save your changes back to the ZyWALL.
Click Reset to return the screen to its last-saved settings.
ZyWALL 110/310/1100 Series User's Guide