Cellular Status Screen - ZyXEL Communications USG40 User Manual

The following table describes the labels in this screen.
Table 45 Monitor > System Status > Login Users
LABEL
Force Logout
#
User ID
Reauth Lease T.
Type
IP Address
User Info
Refresh

6.10 Cellular Status Screen

This screen displays your mobile broadband connection status. Click Monitor > System Status >
Cellular Status to display this screen.
Figure 98 Monitor > System Status > Cellular Status
The following table describes the labels in this screen.
Table 46 Monitor > System Status > Cellular Status
LABEL
Refresh
More Information
#
Extension Slot
Connected Device
Chapter 6 Monitor
DESCRIPTION
Select a user ID and click this icon to end a user's session.
This field is a sequential value and is not associated with any entry.
This field displays the user name of each user who is currently logged in to the
ZyWALL/USG.
This field displays the amount of reauthentication time remaining and the amount of
lease time remaining for each user.
This field displays the way the user logged in to the ZyWALL/USG.
This field displays the IP address of the computer used to log in to the ZyWALL/USG.
This field displays the types of user accounts the ZyWALL/USG uses. If the user type
is ext-user (external user), this field will show its external-group information when
you move your mouse over it.
If the external user matches two external-group objects, both external-group object
names will be shown.
Click this button to update the information in the screen.
DESCRIPTION
Click this button to update the information in the screen.
Click this to display more information on your mobile broadband, such as the
signal strength, IMEA/ESN and IMSI. This is only available when the mobile
broadband device attached and activated on your ZyWALL/USG. Refer to
6.10.1 on page 117.
This field is a sequential value, and it is not associated with any interface.
This field displays where the entry's cellular card is located.
This field displays the model name of the cellular card.
ZyWALL/USG Series User's Guide
115
Section