Group Add/Edit Screen - ZyXEL Communications 310 User Manual

Table 135 Configuration > Object > User/Group > Group (continued)
LABEL
Object
References
#
Group Name
Description
Member

27.3.1 Group Add/Edit Screen

The Group Add/Edit screen allows you to create a new user group or edit an existing one. To
access this screen, go to the Group screen (see
Add icon or an Edit icon.
Figure 245 Configuration > User/Group > Group > Add
The following table describes the labels in this screen.
Table 136 Configuration > User/Group > Group > Add
LABEL
Name
Description
Member List
OK
Cancel
ZyWALL 110/310/1100 Series User's Guide
DESCRIPTION
Select an entry and click Object References to open a screen that shows which settings
use the entry. See Section 7.3.2 on page 122
This field is a sequential value, and it is not associated with a specific user group.
This field displays the name of each user group.
This field displays the description for each user group.
This field lists the members in the user group. Each member is separated by a comma.
DESCRIPTION
Type the name for this user group. You may use 1-31 alphanumeric characters,
underscores( ), or dashes (-), but the first character cannot be a number. This value is
_
case-sensitive. User group names have to be different than user names.
Enter the description of the user group, if any. You can use up to 60 characters,
punctuation marks, and spaces.
The Member list displays the names of the users and user groups that have been added
to the user group. The order of members is not important. Select users and groups from
the Available list that you want to be members of this group and move them to the
Member list. You can double-click a single entry to move it or use the [Shift] or [Ctrl] key
to select multiple entries and use the arrow button to move them.
Move any members you do not want included to the Available list.
Click OK to save your changes back to the ZyWALL.
Click Cancel to exit this screen without saving your changes.
for an example.
Section 27.3 on page 376), and click either the
Chapter 27 User/Group
377