ZyXEL Communications 310 User Manual page 368

Chapter 26 Device HA
Second Option for Connecting the Bridge Interfaces on Two ZyWALLs
Another option is to disable the bridge interfaces, connect the bridge interfaces, activate device HA,
and finally reactivate the bridge interfaces as shown in the following example.
In this case the ZyWALLs are already connected, but the bridge faces have not been configured yet.
1
Configure a disabled bridge interface on the master ZyWALL but disable it. Then set the bridge
interface as a monitored interface, and activate device HA.
Configure a corresponding disabled bridge interface on the backup ZyWALL. Then set the bridge
2
interface as a monitored interface, and activate device HA.
368
Br0 {ge4, ge5}
A
B
Br0 {ge4, ge5}
Br0 {ge4, ge5} Disabled
A
B
Br0 {ge4, ge5} Disabled
A
B
Br0 {ge4, ge5}
Disabled
ZyWALL 110/310/1100 Series User's Guide