Isp Account Edit - ZyXEL Communications 310 User Manual

Chapter 34 ISP Accounts
Table 166 Configuration > Object > ISP Account (continued)
LABEL
Profile Name
Protocol
Authentication
Type
User Name

34.2.1 ISP Account Edit

The ISP Account Edit screen lets you add information about new accounts and edit information
about existing accounts. To open this window, open the ISP Account screen. (See
page 429.) Then, click on an Add icon or Edit icon to open the ISP Account Edit screen below.
Figure 283 Configuration > Object > ISP Account > Edit
The following table describes the labels in this screen.
Table 167 Configuration > Object > ISP Account > Edit
LABEL
Profile Name
Protocol
430
DESCRIPTION
This field displays the profile name of the ISP account. This name is used to identify the
ISP account.
This field displays the protocol used by the ISP account.
This field displays the authentication type used by the ISP account.
This field displays the user name of the ISP account.
DESCRIPTION
This field is read-only if you are editing an existing account. Type in the profile name of the
ISP account. The profile name is used to refer to the ISP account. You may use 1-31
alphanumeric characters, underscores(
a number. This value is case-sensitive.
This field is read-only if you are editing an existing account. Select the protocol used by
the ISP account. Options are:
pppoe - This ISP account uses the PPPoE protocol.
pptp - This ISP account uses the PPTP protocol.
), or dashes (-), but the first character cannot be
_
ZyWALL 110/310/1100 Series User's Guide
Section 34.2 on