ZyXEL Communications 310 User Manual page 144

Chapter 7 Interfaces
Figure 91 Network > Interface > Tunnel > Add/Edit
Each field is explained in the following table.
Table 51 Network > Interface > Tunnel > Add/Edit
LABEL
Show Advanced
Settings / Hide
Advanced Settings
General Settings
Enable
Interface Properties
Interface Name
Zone
144
DESCRIPTION
Click this button to display a greater or lesser number of configuration fields.
Select this to enable this interface. Clear this to disable this interface.
This field is read-only if you are editing an existing tunnel interface. Enter the name of
the tunnel interface. The format is tunnelx, where x is 0 - 3. For example, tunnel0.
Use this field to select the zone to which this interface belongs. This controls what
security settings the ZyWALL applies to this interface.
ZyWALL 110/310/1100 Series User's Guide