The Packet Capture Files Screen - ZyXEL Communications 310 User Manual

Chapter 40 Diagnostics
Table 206 Maintenance > Diagnostics > Packet Capture (continued)
LABEL
Duration
File Suffix
Number Of Bytes To
Capture (Per Packet)
Capture
Stop
Reset

40.3.1 The Packet Capture Files Screen

Click Maintenance > Diagnostics > Packet Capture > Files to open the packet capture files
screen. This screen lists the files of packet captures stored on the ZyWALL or a connected USB
storage device. You can download the files to your computer where you can study them using a
packet analyzer (also known as a network or protocol analyzer) such as Wireshark.
Figure 357 Maintenance > Diagnostics > Packet Capture > Files
514
DESCRIPTION
Set a time limit in seconds for the capture. The ZyWALL stops the capture and
generates the capture file when either this period of time has passed or the file
reaches the size specified in the File Size field. 0 means there is no time limit.
Specify text to add to the end of the file name (before the dot and filename
extension) to help you identify the packet capture files. Modifying the file suffix also
avoids making new capture files that overwrite existing files of the same name.
The file name format is "interface name-file suffix.cap", for example "vlan2-packet-
capture.cap".
Specify the maximum number of bytes to capture per packet. The ZyWALL
automatically truncates packets that exceed this size. As a result, when you view
the packet capture files in a packet analyzer, the actual size of the packets may be
larger than the size of captured packets.
Click this button to have the ZyWALL capture packets according to the settings
configured in this screen.
You can configure the ZyWALL while a packet capture is in progress although you
cannot modify the packet capture settings.
The ZyWALL's throughput or performance may be affected while a packet capture is
in progress.
After the ZyWALL finishes the capture it saves a separate capture file for each
selected interface. The total number of packet capture files that you can save
depends on the file sizes and the available flash storage space. Once the flash
storage space is full, adding more packet captures will fail.
Click this button to stop a currently running packet capture and generate a separate
capture file for each selected interface.
Click this button to return the screen to its last-saved settings.
ZyWALL 110/310/1100 Series User's Guide