ZyXEL Communications 310 User Manual page 356

Chapter 25 Bandwidth Management
Figure 234
The following table describes the labels in this screen.
Configuration > Bandwidth Management
Table 128
LABEL
Create new Object
Configuration
Enable
Description
Criteria
User
Schedule
Incoming Interface
356
Configuration > Bandwidth Management > Add/Edit
DESCRIPTION
Use to configure any new settings objects that you need to use in this screen.
Select this check box to turn on this policy.
Enter a description of this policy. It is not used elsewhere. You can use
alphanumeric and
characters long.
Use this section to configure the conditions of traffic to which this policy applies.
Select a user name or user group to which to apply the policy. Use Create new
Object if you need to configure a new user account. Select any to apply the policy for
every user.
Select a schedule that defines when the policy applies or select Create Object to
configure a new one (see
to make the policy always effective.
Select the source interface of the traffic to which this policy applies.
characters, and it can be up to 60
()+/:=?!*#@$_%-
Chapter 30 on page 396
ZyWALL 110/310/1100 Series User's Guide
for details). Otherwise, select none