Chapter 11 Zones
The following table describes the labels in this screen.
Table 79 Network > Zone > Add/Edit
LABEL
Name
Member List
OK
Cancel
214
DESCRIPTION
For a system default zone, the name is read only.
For a user-configured zone, type the name used to refer to the zone. You may use 1-31
alphanumeric characters, underscores (
be a number. This value is case-sensitive.
Available lists the interfaces and VPN tunnels that do not belong to any zone. Select
the interfaces and VPN tunnels that you want to add to the zone you are editing, and
click the right arrow button to add them.
Member lists the interfaces and VPN tunnels that belong to the zone. Select any
interfaces that you want to remove from the zone, and click the left arrow button to
remove them.
Click OK to save your customized settings and exit this screen.
Click Cancel to exit this screen without saving.
), or dashes (-), but the first character cannot
_
ZyWALL 110/310/1100 Series User's Guide