ZyXEL Communications 310 User Manual page 87

• LAN IP with heaviest traffic and how much traffic has been sent to and from each one
You use the Traffic Statistics screen to tell the ZyWALL when to start and when to stop collecting
information for these reports. You cannot schedule data collection; you have to start and stop it
manually in the Traffic Statistics screen.
Figure 61 Monitor > System Status > Traffic Statistics
There is a limit on the number of records shown in the report. Please see
more information. The following table describes the labels in this screen.
Table 24 Monitor > System Status > Traffic Statistics
LABEL
Data Collection
Collect Statistics
Apply
Reset
Statistics
Interface
ZyWALL 110/310/1100 Series User's Guide
DESCRIPTION
Select this to have the ZyWALL collect data for the report. If the ZyWALL has already been
collecting data, the collection period displays to the right. The progress is not tracked here
real-time, but you can click the Refresh button to update it.
Click Apply to save your changes back to the ZyWALL.
Click Reset to return the screen to its last-saved settings.
Select the interface from which to collect information. You can collect information from
Ethernet, VLAN, bridge and PPPoE/PPTP interfaces.
Chapter 6 Monitor
Table 25 on page 89 for
87