Chapter 10 Routing Protocols
Table 75 Configuration > Network > Routing Protocol > OSPF (continued)
LABEL
Add
Edit
Remove
#
Area
Type
Authentication
Apply
Reset
10.3.2 OSPF Area Add/Edit Screen
The OSPF Area Add/Edit screen allows you to create a new area or edit an existing one. To access
this screen, go to the OSPF summary screen (see
Add icon or an Edit icon.
Figure 119 Configuration > Network > Routing > OSPF > Add
206
DESCRIPTION
Click this to create a new OSPF area.
Double-click an entry or select it and click Edit to open a screen where you can
modify the entry's settings.
To remove an entry, select it and click Remove. The ZyWALL confirms you want to
remove it before doing so.
This field is a sequential value, and it is not associated with a specific area.
This field displays the 32-bit ID for each area in IP address format.
This field displays the type of area. This type is different from the Type field above.
This field displays the default authentication method in the area.
Click this button to save your changes to the ZyWALL.
Click this button to return the screen to its last-saved settings.
Section 10.3 on page
201), and click either the
ZyWALL 110/310/1100 Series User's Guide