ZyXEL Communications 310 User Manual page 164

Chapter 7 Interfaces
Each field is described in the table below.
Table 58 Configuration > Network > Interface > Bridge > Create Virtual Interface
LABEL
IPv4/IPv6 View /
IPv4 View / IPv6
View
Show Advanced
Settings / Hide
Advanced Settings
Create New Object
General Settings
Enable Interface
General IPv6
Setting
Enable IPv6
Interface Properties
Interface Type
Interface Name
Zone
Description
Member
Configuration
Available
Member
IP Address
Assignment
Get
Automatically
Use Fixed IP
Address
164
DESCRIPTION
Use this button to display both IPv4 and IPv6, IPv4-only, or IPv6-only configuration
fields.
Click this button to display a greater or lesser number of configuration fields.
Click this button to create a DHCPv6 lease or DHCPv6 request object that you may use
for the DHCPv6 settings in this screen.
Select this to enable this interface. Clear this to disable this interface.
Select this to enable IPv6 on this interface. Otherwise, clear this to disable it.
Select one of the following option depending on the type of network to which the
ZyWALL is connected or if you want to additionally manually configure some related
settings.
internal is for connecting to a local network. Other corresponding configuration
options: DHCP server and DHCP relay. The ZyWALL automatically adds default SNAT
settings for traffic flowing from this interface to an external interface.
external is for connecting to an external network (like the Internet). The ZyWALL
automatically adds this interface to the default WAN trunk.
For general, the rest of the screen's options do not automatically adjust and you must
manually configure a policy route to add routing and SNAT settings for the interface.
This field is read-only if you are editing the interface. Enter the name of the bridge
interface. The format is brx, where x is 0 - 11. For example, br0, br3, and so on.
Select the zone to which the interface is to belong. You use zones to apply security
settings such as firewall, remote management.
Enter a description of this interface. It is not used elsewhere. You can use alphanumeric
and
()+/:=?!*#@$_%-
This field displays Ethernet interfaces and VLAN interfaces that can become part of the
bridge interface. An interface is not available in the following situations:
• There is a virtual interface on top of it
• It is already used in a different bridge interface
Select one, and click the >> arrow to add it to the bridge interface. Each bridge
interface can only have one VLAN interface.
This field displays the interfaces that are part of the bridge interface. Select one, and
click the << arrow to remove it from the bridge interface.
Select this if this interface is a DHCP client. In this case, the DHCP server configures
the IP address, subnet mask, and gateway automatically.
Select this if you want to specify the IP address, subnet mask, and gateway manually.
characters, and it can be up to 60 characters long.
ZyWALL 110/310/1100 Series User's Guide