ZyXEL Communications 310 User Manual page 30

Chapter 1 Introduction
Figure 17 Moving Columns
Use the icons and fields at the bottom of the table to navigate to different pages of entries and
control how many entries display at a time.
Figure 18 Navigating Pages of Table Entries
The tables have icons for working with table entries. You can often use the [Shift] or [Ctrl] key to
select multiple entries to remove, activate, or deactivate.
Figure 19 Common Table Icons
Here are descriptions for the most common table icons.
Table 9 Common Table Icons
LABEL
Add
Edit
Remove
Activate
Inactivate
Connect
Disconnect
Object
References
Move
30
DESCRIPTION
Click this to create a new entry. For features where the entry's position in the numbered list is
important (features where the ZyWALL applies the table's entries in order like the firewall for
example), you can select an entry and click Add to create a new entry after the selected entry.
Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings. In some tables you can just click a table entry and edit it directly in the table.
For those types of tables small red triangles display for table entries with changes that you have
not yet applied.
To remove an entry, select it and click Remove. The ZyWALL confirms you want to remove it
before doing so.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
To connect an entry, select it and click Connect.
To disconnect an entry, select it and click Disconnect.
Select an entry and click Object References to check which settings use the entry.
To change an entry's position in a numbered list, select it and click Move to display a field to
type a number for where you want to put that entry and press [ENTER] to move the entry to the
number that you typed. For example, if you type 6, the entry you are moving becomes number 6
and the previous entry 6 (if there is one) gets pushed up (or down) one.
ZyWALL 110/310/1100 Series User's Guide