Quick Setup Interface Wizard: Summary - ZyXEL Communications 310 User Manual

Table 12 WAN and ISP Connection Settings (continued)
LABEL
Server IP
Connection ID
WAN Interface
Setup
WAN Interface
Zone
IP Address
First DNS
Server
Second DNS
Server
Back
Next

4.2.5 Quick Setup Interface Wizard: Summary

This screen displays the WAN interface's settings.
Figure 28 Interface Wizard: Summary WAN (PPTP Shown)
ZyWALL 110/310/1100 Series User's Guide
DESCRIPTION
Type the IP address of the PPTP server.
Enter the connection ID or connection name in this field. It must follow the "c:id" and
"n:name" format. For example, C:12 or N:My ISP.
This field is optional and depends on the requirements of your DSL modem.
You can use alphanumeric and -_
This displays the identity of the interface you configure to connect with your ISP.
This field displays to which security zone this interface and Internet connection will
belong.
This field is read-only when the WAN interface uses a dynamic IP address. If your WAN
interface uses a static IP address, enter it in this field.
These fields only display for an interface with a static IP address. Enter the DNS server
IP address(es) in the field(s) to the right.
Leave the field as 0.0.0.0 if you do not want to configure DNS servers. If you do not
configure a DNS server, you must know the IP address of a machine in order to access
it.
DNS (Domain Name System) is for mapping a domain name to its corresponding IP
address and vice versa. The DNS server is extremely important because without it, you
must know the IP address of a computer before you can access it. The ZyWALL uses a
system DNS server (in the order you specify here) to resolve domain names for VPN,
DDNS and the time server.
Click Back to return to the previous screen.
Click Next to continue.
Chapter 4 Quick Setup Wizards
characters, and it can be up to 31 characters long.
:
47