Chapter 31 AAA Server
Figure 267 Configuration > Object > AAA Server > Active Directory (or LDAP) > Add
The following table describes the labels in this screen.
Table 154 Configuration > Object > AAA Server > Active Directory (or LDAP) > Add
LABEL
Name
Description
Server Address
Backup Server
Address
Port
404
DESCRIPTION
Enter a descriptive name (up to 63 alphanumerical characters) for identification
purposes.
Enter the description of each server, if any. You can use up to 60 printable ASCII
characters.
Enter the address of the AD or LDAP server.
If the AD or LDAP server has a backup server, enter its address here.
Specify the port number on the AD or LDAP server to which the ZyWALL sends
authentication requests. Enter a number between 1 and 65535.
This port number should be the same on all AD or LDAP server(s) in this group.
ZyWALL 110/310/1100 Series User's Guide