ZyXEL Communications 310 User Manual page 23

Figure 9 Site Map Object Reference
Click Object Reference to open the Object Reference screen. Select the type of object and the
individual object and click Refresh to show which configuration settings reference the object.
Figure 10 Object Reference
The fields vary with the type of object. This table describes labels that can appear in this screen.
Table 5 Object References
LABEL
Object Name This identifies the object for which the configuration settings that use it are displayed. Click the
#
Service
Priority
Name
Description
ZyWALL 110/310/1100 Series User's Guide
DESCRIPTION
object's name to display the object's configuration screen in the main window.
This field is a sequential value, and it is not associated with any entry.
This is the type of setting that references the selected object. Click a service's name to display
the service's configuration screen in the main window.
If it is applicable, this field lists the referencing configuration item's position in its list,
otherwise N/A displays.
This field identifies the configuration item that references the object.
If the referencing configuration item has a description configured, it displays here.
Chapter 1 Introduction
23