Ospf Area Commands; Virtual Link Commands - ZyXEL Communications 1050 Cli Reference Manual

Table 36 router Commands: General OSPF Configuration (continued)
COMMAND
[no] passive-interface interface_name
[no] router-id IP

8.2.3 OSPF Area Commands

This table lists the commands for OSPF areas.
Table 37 router Commands: OSPF Areas
COMMAND
router ospf
[no] network interface area IP
[no] area IP [{stub | nssa}]
[no] area IP authentication
[no] area IP authentication message-digest Enables MD5 authentication in the specified area.
[no] area IP authentication
authentication-key authkey
[no] area IP authentication message-
digest-key <1..255> md5 authkey

8.2.4 Virtual Link Commands

This table lists the commands for virtual links in OSPF areas.
Table 38 router Commands: Virtual Links in OSPF Areas
COMMAND
show ospf area IP virtual-link
router ospf
[no] area IP virtual-link IP
[no] area IP virtual-link IP
authentication
ZyWALL (ZLD) CLI Reference Guide
Chapter 8 Routing Protocol
DESCRIPTION
Sets the direction to "In-Only" for the specified
interface. The no command sets the direction to
"BiDir".
Sets the 32-bit ID (in IP address format) of the
ZyWALL. The command resets it to "default", or
no
the highest available IP address.
DESCRIPTION
Enters sub-command mode.
Adds the specified interface to the specified area.
The no command removes the specified interface
from the specified area.
Creates the specified area and sets it to the
indicated type. The command removes the
no
area.
Enables text authentication in the specified area.
The no command disables authentication in the
specified area.
The command disables authentication in the
no
specified area.
Sets the password for text authentication in the
specified area. The no command clears the
password.
Sets the MD5 ID and password for MD5
authentication in the specified area. The
command clears the MD5 ID and password.
DESCRIPTION
Displays information about virtual links for the
specified area.
Creates the specified virtual link in the specified
area. The no command removes the specified
virtual link.
Enables text authentication in the specified virtual
link. The command disables authentication in
no
the specified virtual link.
no
77