Upgrading the Card's Firmware
EATON Power Xpert
®
Gateway Series 1000 Card User's Guide
To generate an interval trend log:
NOTE The interval time value is not selectable. The value is 60 minutes.
1.
From the card's Web page, click the View Interval Trend Log link from
the menu bar.
2.
Click Open or Save from the file download window.
To select options for the trend log:
1.
Click Options.
2.
Adjust the count, and select a start and end date for the log.
NOTE The default count value is 100.
To erase an interval trend log:
1.
Select Options and click Erase the log.
2.
Click OK to erase the log; otherwise, click Cancel.
The card's firmware may be updated by downloading the appropriate file
from www.eaton.com/powerxpert. During the upgrade process, the
PXGX Series 1000 Card does not monitor the PDU/RPP/RPM status.
To upgrade the firmware:
1.
From the card's Web page, click the Firmware link from the menu
bar.
2.
Click Browse.
3.
Download the pxgx_pdu_xxx.rom firmware file, available on the
Web at www.eaton.com/powerxpert.
4.
If you want the card to reboot after updating the firmware, activate
the Reboot when complete checkbox. An audible alarm sounds as the
card reboots, and the Web page shows the "Gateway rebooting,
please wait..." message. The Web page reloads when complete.
OPERATION AND MAINTENANCE
S
www.eaton.com/powerquality
164201670 Rev 4
85