Configuring Http And Https; Configuring The Energy Management System (Ems) - Eaton Power Xpert 1000 Series User Manual

CONFIGURING THE CARD

Configuring HTTP and HTTPS

Configuring the Energy Management System (EMS)

30 EATON Power Xpert
To configure the ports for Hypertext Transfer Protocol (HTTP) and HTTP
over Secure Socket Layer (HTTPS):
1. From the card's Web page, click the Access Control link from the
menu bar.
2. Type the TCP port number for HTTP in the HTTP port field.
3. Type the TCP port number for HTTPS in the HTTPS port field (the
default is 443).
4. To require a secure connection to the card, activate the checkbox
for Require HTTPS.
Use the Configuring EMS option to enter panel settings and save them
easily to the PDU/RPP/RPM instead of configuring through the front
panel display.
To configure the EMS:
1. From the card's Web page, click the EMS link from the menu bar.
2. Select a panel number and click Retrieve.
The data from the PDU/RPP/RPM appears in a panel map.
3. Enter a panel name and specify the percentage of the rating to
cause a warning and the percentage of the rating to cause an alarm.
® Gateway Series 1000 Card User's Guide
S
www.eaton.com/powerquality
164201670 Rev 4