Configuring Snmp Options; Community Strings And Trap Recipients - Eaton Power Xpert 1000 Series User Manual

CONFIGURING THE CARD

Configuring SNMP Options

26 EATON Power Xpert
5. To select the time zone for the card, specify the Timezone for Logs,
email, and connected device.
6. To specify how the temperature appears on the Web page, select
Fahrenheit or Celsius.
7. Click Apply and then OK to save the settings.
8. After saving the settings, reload the Web page to view the updated
formats.
This section describes the following SNMP configuration options:
S
Configuring community strings and trap recipients
S
Restricting SNMP access
S
Setting system location and system contact
S
Managing from an SNMP NMS

Community Strings and Trap Recipients

The default community strings are "public" for read-only, "private" for
read-write, and "public" for receiving traps.
The PXGX Series 1000 Card supports several event-related traps that
can be reported to the SNMP network management software. See
Chapter 5, "MIB Files," on page 51 for more information.
To configure the SNMP options:
1. From the card's Web page, click the SNMP link from the menu bar.
2. To change the community strings, type a new community string in
the appropriate field.
3. Click Add to add a new trap recipient entry to the list. An
IP/hostname field appears. Enter the IP address or host name for the
trap recipient.
NOTE When using host names, verify that the IP address of your network DNS Server is
configured (see "Network Configuration" on page 18).
® Gateway Series 1000 Card User's Guide
S
www.eaton.com/powerquality
164201670 Rev 4