Changing The Passwords - Eaton Power Xpert 1000 Series User Manual

CONFIGURING THE CARD

Changing the Passwords

24 EATON Power Xpert
The user name and default password is user for read-only information
and admin for configuration (read/write) options.
To change the passwords:
1. From the card's Web page, click the Access Control link from the
menu bar.
The Access Control page appears with the password fields blank.
2. To change the user password, enter the new password in the 'user'
password field. The characters appear as asterisks (*).
To change the admin password, log in as admin and enter the new
password in the 'admin' password field. The characters appear as
asterisks (*).
3. Click Apply and then OK to save the settings. The password updates
and displays as a full row of asterisks.
NOTE Once you have logged in as admin, it is important to completely exit the browser to
set the security level back to the standard read-only level. Click the Logon as User link from
the menu bar to force a logoff and re-login as user.
NOTE After you change the password, you will be prompted to enter the new password
the next time you navigate through the card's Web page.
® Gateway Series 1000 Card User's Guide
S
www.eaton.com/powerquality
164201670 Rev 4