Getting Started; Installation Checklist - Eaton Power Xpert 1000 Series User Manual

Chapter 2

Installation Checklist

EATON Power Xpert
® Gateway Series 1000 Card User's Guide

Getting Started

NOTE If you have completed all sections in the Power Xpert Gateway Series 1000 Card
Quick Start Instructions, proceed to Chapter 2, "Configuring the Card," on page 21.
This section explains:
S
Checklist items needed for installation
S
Installing the card
S
Connecting the card
S
Verifying or assigning the IP address
S
Configuring the network settings
1. Verify that all of the following items are available:
- PXGX Series 1000 Card package contents (card, configuration
cable, Ethernet cable, and quick start instructions)
- Phillips
screwdriver
®
- Available serial port (RS-232)
- HyperTerminal
terminal emulation application
- Web browser (Internet Explorer or Mozilla
recommended)
2. Provide the local network administrator with the card's MAC
address:
- MAC Address Port 1
- MAC Address Port 2
The MAC address for Port 1 is located on a label on top of the card.
To determine the MAC address of Port 2, increase the Port 1
address by one. For example: 0060261089A8 (Port 1),
0060261089A9 (Port 2).
(ships with Microsoft
®
_________________________
_________________________
S
www.eaton.com/powerquality
164201670 Rev 4
Windows ) or equivalent
® ®
Firefox
® ®
3