Chapter 3
EATON Power Xpert
®
Gateway Series 1000 Card User's Guide
Configuring the Card
NOTE If DHCP is disabled and you will be using host names for servers, such as the mail
server, Network Time Protocol (NTP) server, SNMP hosts, Modbus/TCP hosts, or trap
recipients, enter the IP address of your network DNS Server (see "Network Configuration" on
page 18).
NOTE You must be logged in as admin to configure the card. Once you have logged in as
admin, it is important to completely exit the browser to set the security level back to the
standard read-only level. Click the Logon as User link from the menu bar to force a logoff
and re-login as user.
This section explains:
S
Navigating the card's Web page
S
Changing the passwords
S
Setting the date and time
S
Configuring SNMP options and managing from an SNMP NMS
S
Configuring Modbus TCP/IP options
S
Configuring the Energy Management System (EMS)
S
Configuring HTTP and HTTPS
S
Configuring e-mail notification
S
Configuring the Powerware Environmental Monitoring Probe (EMP)
S
Configuring auto discovery settings
S
Saving and restoring configuration settings
S
www.eaton.com/powerquality
164201670 Rev 4
21