Configuring Auto Discovery Settings
Saving and Restoring Configuration Settings
EATON Power Xpert
®
Gateway Series 1000 Card User's Guide
Configure the Auto Discovery settings so that the Power Xpert software
can find the PXGX Series 1000 Card on the network automatically. The
card sends multicast discovery messages to any control Power Xpert
host monitoring the specified Listen port.
To configure the auto discovery settings:
1.
From the card's Web page, click the Auto Discovery link from the
menu bar.
2.
The default Listen port is 1900. To modify, enter a value between
10000 and 65535.
3.
The default Announce period is 600 seconds. To modify, enter a
value between 60 and 1800 seconds.
4.
The default Announce TTL is 4 hops. To modify, enter a value
between 1 and 254.
You can create a backup of the PXGX Series 1000 Card settings and the
EMS configuration and restore them at a later date.
Creating a Backup
To create a backup:
1.
From the card's Web page, click the Save and Restore link from the
menu bar.
2.
To save the panel and breaker settings in the EMS configuration,
click Save EMS configuration.
The card exports an XML file. Click Save and enter a file name and
location to save the XML file.
3.
To save the PXGX Series 1000 Card settings and preferences, click
Save gateway configuration.
The card exports an XML file. Click Save and enter a file name and
location to save the XML file.
S
www.eaton.com/powerquality
164201670 Rev 4
CONFIGURING THE CARD
35